|
Product Details:
Payment & Shipping Terms:
|
| Spraying Pressure: | 0.25MPa ~ 0.4MPa | Warm-up Time: | Approx. 20/Min |
|---|---|---|---|
| Exhaust Method: | Upper Exhaust | Preheating Temp: | Room Temperature ~300C |
| No. Of Preheating Zones: | 3 | Transmission Methos: | Step Motor |
| Highlight: | PCB Lead Free Soldering Machine,RF 350B Lead Free Soldering Machine,RF 350B SMT Wave Solder |
||
Step Motor Upper Exhaust Lead Free Soldering Machine SMT Wave Solder
Lead Free PCB Production Line RF-350B IR SMT Machine Wave Soldering
The Basic Information of Wave Solder Machine
| Mode | RF-350B |
| Auto Flux Feeding | Optional |
| Transmission Methos | Step Motor |
| Spraying Pressure | 0.25MPa ~ 0.4MPa |
| Wave Height Adjustment | Manual |
| Warm-up Time | Approx. 20/Min |
| Warm-up Time | Approx. 180min ( Setting at 250C) |
| Control Mode | PLC + Computer |
| Preheating Length | 1800MM |
| Exhaust Method | Upper Exhaust |
| Solder Pot Capacity | About 400Kg |
| Preheating Temp | Room Temperature ~300C |
| Flux Flow | Flux Flow Meter |
| Solder Pot Type | Motor Drive |
| No. of Preheating Zones | 3 |
INTRODUCTION:
1. Automatic conveying power system and auto synchronous board feeding functions.
2. Solder Pot peak uses frequency conversing speed adjustment which can independently control the wave height.
3. Fluxer system using transverse Japanese spray nozzle, driven by pneumatic cylinder and PLC control, accurate and reliable.
4. PLC is used to control the machine, to ensure the reliability and stability of the system.
5. Pre-heaters using Infrared heating element, heat radiated efficiently to the circuit board with fast ramp up and fully activating liquid flux.
6. Special alloy solder fingers, strengthened double v-groove.
7. Solder-motor adopts imported high frequency conversion motor with independent control, stable performance and long lifetime.
8. Pre-heater passage with modularized design, meet with environmental protection requirement, safety and convenient to cleanup.
9.Preheaters uses three independent temperature control so as to ensure the excellent heat preservation, temperature uniformity, temperature accuracy in ±2ºC.
10.Timer startup feature for solder pot, solder melted within 90 minutes.
11. Automatic finger cleaner ensure the cleanliness of solder fingers.
Intelligent monitoring and alarm system ensure the stable performance and operators’ safety.
Installation Drawing
Photos of Wave Soldering Machine RF-350B
Contact Person: Ivan Zhu
Tel: 86-13534290911
